50 Operating in conventional mode
Making calls
To make a call:
1 Select the required zone (see “Selecting a zone” on
page 46).
2 Select the required channel (see “Selecting a
channel” on page 47).
3 Hold the radio so that the microphone is about
one inch (2.5 cm) from your mouth and press the
PTT key to transmit.
If the channel is busy, you may not be able to
transmit. Wait until the status LED has stopped
glowing green, and then try again.
4 Speak clearly into the microphone and release the
PTT key when you have finished talking.
While you are transmitting the LED glows red and
appears in the display.
5 Finish your conversation as soon as possible and
release the PTT key. For a short time, your radio may
prevent you from making a call.
Making an individual call
This feature is available for digital channels only.
To make a call to one person rather than a group of
people:
1 Press Menu and select Individual call. (The person
to whom you last made an individual call is
highlighted.)
(Depending on how your radio is programmed, you
may be able to press a function key or use your Quick
Access menu to select individual calls.)
Channel 1
Zone 11
MenuCancel
To Next Page
Loading...
Need help?
General
