Tait TP9400 User Manual

Basic operation 45
Reconnecting a wireless headset
1 Press Menu and select Wireless headset > Connect.
Alternatively, if you have previously used the
headset with your radio, select Wireless headset >
Reconnect.
(Depending on how your radio is programmed, you
may be able to use a function key to connect and
disconnect a wireless headset.)
2 When the message Calling headset appears in the
display, press the connect button on the wireless
headset to acknowledge the connection.
Once the headset is successfully connected,
remains in the radio display.
Disconnecting a wireless headset
■ Press Menu and select Wireless headset >
Disconnect.
Once the wireless headset is disconnected, no
longer appears in the display.
(Depending on how your radio is programmed, you
may be able to use a function key to connect or
disconnect a wireless headset.)
SelectBack
Wireless headset
Connect
Reconnect last
Channel 12
Menu
SelectBack
Wireless headset
Disconnect
Connection info

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000