Tait TP9400 - Page 68

68 Operating in P25 trunking mode
2 Select the required talkgroup:
■ Press Menu and select Channels.
■ Scroll to the talkgroup you want, and press
Select.
(Depending on how your radio is programmed, you
may be able to press a function key, use your Quick
Access menu or use the channel selector to select a
talkgroup.)
Your radio now indicates the currently selected
talkgroup.
3 To call this talkgroup, hold the radio so that the
microphone is about one inch (2.5 cm) from your
mouth.
4 Press and hold the PTT key to transmit.
5 When you hear three short beeps, speak clearly into
the microphone and release the PTT key when you
have finished talking.
While you are transmitting, the LED glows red and
appears in the display.
Channels
Talkgroup 2
Channel 1
SelectBack
Talkgroup 2
Zone 2
talkgroup name
Menu
B
Talkgroup 2
Zone 2
Menu
B