Takeuchi TB216 User Manual

5-12
Maintenance
SAFETY-CRITICAL PARTS
To use the machine safely, periodically perform inspection and maintenance. The safety-critical
parts listed below must be periodically replaced for an increased safety.
Serious injury or a fire could result if they are worn or damaged.
List of safety-critical parts
Unit Safety-critical parts to be replaced periodically When to replace
Fuel system
Fuel hoses
Every 2 years
Packing on fuel filler cap
Hydraulic
system
Main body
Hydraulic hoses (pump - delivery)
Hydraulic hoses (pump - suction)
Hydraulic hoses (slew motor)
Hydraulic hoses (travel motor)
Working
equipment
Hydraulic hoses (boom cylinder piping)
Hydraulic hoses (arm cylinder piping)
Hydraulic hoses (bucket cylinder piping)
Hydraulic hoses (swing cylinder)
Hydraulic hoses (blade cylinder)
Hydraulic hoses (span cylinder)
Hydraulic hoses (pilot valve)
Hydraulic hoses (auxiliary piping)
Seat belt Every 3 years
SAFETY-CRITICAL PARTS

Takeuchi TB216 Specifications

General

Engine Make	Yanmar
Engine Model	3TNV70
Transport Width	980 mm
Bucket Capacity	0.04 m³
Maximum Reach	4, 040 mm
Max Reach at Ground Level	3, 980 mm