Takeuchi TB216 User Manual

2-9
Controls
ENGINE HOOD
• Before opening the engine hood, be
sure to stop the engine. If a hand or tool
becomes trapped in the rotating or
moving part, serious injury could result.
• When opening or closing the engine
hood, be careful not to get your hands
or other parts of your body caught by it.
Opening
1. Insert the starter key and turn it
counterclockwise to unlock the engine
hood (1).
2. Push in the key hole (2) with your thumb
and open the engine hood (1).
Closing
1. Close the engine hood (1) and press down
the edge of it until a click is heard.
COVERS
SIDE COVER
When opening and closing the side cover,
be careful not to get your hands or other
parts of your body caught by the cover.
Opening
1. Insert the starter key and turn it
counterclockwise to unlock the side cover
(1).
2. Fully open the side cover (1) and secure it
with the stay (2)
Closing
1. Support the side cover (1) by hand and
release the stay (2).
2. Close the side cover (1).
3. Insert the starter key and turn it clockwise
to lock the side cover (1).

Takeuchi TB216 Specifications

General

Engine Make	Yanmar
Engine Model	3TNV70
Transport Width	980 mm
Bucket Capacity	0.04 m³
Maximum Reach	4, 040 mm
Max Reach at Ground Level	3, 980 mm