Takeuchi TB216 User Manual

5-17
Maintenance
INSPECTING BY WALKING AROUND THE
MACHINE
4. Check lights for dirt, damage and burnt
out bulbs.
5. Check attachments and hoses for
damage.
6. Check the bucket, bucket teeth and side
cutter for wear, damage and looseness.
7. Check the hook, slip stopper and hook
mount of buckets with hooks for damage.
(Option)
8. Check the handrail and steps for damage
and loose bolts.
9. Check the crawlers, shoe slides, track
rollers, idlers and sprockets for damage,
wear and loose bolts.
10. Check for oil leakage from the travel
motor.
11. Check the canopy/cab and guard for
damage and the nuts and bolts for
looseness.
12. Check the rearview mirror and the interior
rearview mirror for dirt or damage, and
adjust them if necessary.
13. Check the labels for dirt and damage.
WALK-AROUND INSPECTION
INSPECTING WHILE SITTING IN THE
OPERATOR’S SEAT
14. Check the windshield for dirt or damage.
15. Check the seat and seat belt for dirt or
damage.
Check the operator’s seat for dirt, oil or
other combustible materials.
16. Check the monitor, instruments and
switches for dirt or damage.

Takeuchi TB216 Specifications

General

Engine Make	Yanmar
Engine Model	3TNV70
Transport Width	980 mm
Bucket Capacity	0.04 m³
Maximum Reach	4, 040 mm
Max Reach at Ground Level	3, 980 mm