Takeuchi TB216 User Manual

6-9
TroubleshooTing
IF A WARNING LAMP FLASHES
If an alarm is sounded or a warning lamp starts flashing during operation, park the machine in
a safe place and perform the remedy procedures described below.
Warning lamp Lamp name Causes and remedies
Engine
emergency
lamp
There is a problem in the engine.
Refer to the respective warning lamp below.
Battery charge
warning lamp
There is a problem with the fan belt or charger.
Check the fan belt for slack or breakage and adjust as
necessary.
If the lamp continues flashing after maintenance, there is
likely a problem with the charger. Consult your sales or
service dealer for help.
Refer to “Inspecting and adjusting the fan belt” on page
5-25.
Engine oil
pressure
warning lamp
A problem has occurred in the engine lubrication system.
Inspect the engine oil level.
If the lamp is flashing when the oil is normal or if it
continues flashing after replenishment of oil, consult your
sales or service dealer.
Refer to “Inspecting and replenishing the engine oil” on
page 5-19.
Coolant
temperature
warning lamp
The coolant temperature is too high and the engine is
overheating.
Refer to “If the engine overheats” on page 6-3.
Fuel level
warning lamp
The fuel level is too low. Add fuel.
Refer to “Inspecting the fuel level” on page 5-20.
IF A WARNING LAMP FLASHES

Takeuchi TB216 Specifications

General

Engine Make	Yanmar
Engine Model	3TNV70
Transport Width	980 mm
Bucket Capacity	0.04 m³
Maximum Reach	4, 040 mm
Max Reach at Ground Level	3, 980 mm