Takeuchi TB216 User Manual

6-10
TroubleshooTing
OTHER SYMPTOMS
OTHER SYMPTOMS
For symptoms not included in the table below or if the problem persists after the proper
remedies have been taken, consult your sales or service dealer.
Symptoms Major causes Remedies
Left and right operating levers
do not move smoothly
• Insufficient grease on the
left and right operating
levers
• Grease the levers.
Refer to page 5-54.
Blade lever and throttle lever
do not move smoothly
• Wire is stretched too lose • Adjust or replace (ask your
sales or service dealer).
Hoe attachment, slewing or
traveling operation not
possible
• Safety lock lever is raised
(locked)
• Lower (release) the safety
lock lever.
Refer to page 2-29.
• Fuse is blown • Replace the fuse.
Refer to page 6-6.
• Adjustment of travel lock is
faulty
• Adjust the travel lock (ask
your sales or service dealer).
Digging force is insufficient • Hydraulic oil level too low • Add to the specified level.
Refer to page 5-21.
• Hydraulic oil is not warm
enough
• Perform the warm-up.
Refer to page 3-8.
• Air cleaner is clogged • Clean the air cleaner.
Refer to page 5-36.
• Hydraulic oil is not of
suitable type
• Replace the hydraulic oil.
Refer to page 5-48.
Traveling is not possible or
not smooth
• Stones or foreign objects
are stuck
• Remove the foreign object.
Machine veers to the right/left • Stones or foreign objects
are stuck
• Remove the foreign object.
• Faulty crawler tension
adjustment
• Adjust the crawler to the
prescribed tension.
Refer to page 5-28.
Travel speed cannot be
changed
• Fuse is blown • Replace the fuse.
Refer to page 6-6.

Takeuchi TB216 Specifications

General

Engine Make	Yanmar
Engine Model	3TNV70
Transport Width	980 mm
Bucket Capacity	0.04 m³
Maximum Reach	4, 040 mm
Max Reach at Ground Level	3, 980 mm