Takeuchi TB216 User Manual

5-23
Maintenance
LUBRICATING THE WORKING EQUIPMENT
1. Keep the machine configuration as shown in the diagram above, lower the working
equipment to the ground, and then stop the engine.
2. Use the grease gun to lubricate the grease fittings.
3. Wipe off the excess grease.
Note: It is not necessary to lubricate the dozer blade, as it is using a “self-lubrication bush”.
DAILY INSPECTION (EVERY 10 HOURS)

Takeuchi TB216 Specifications

General

Engine Make	Yanmar
Engine Model	3TNV70
Transport Width	980 mm
Bucket Capacity	0.04 m³
Maximum Reach	4, 040 mm
Max Reach at Ground Level	3, 980 mm