Takeuchi TB216 User Manual

3-2
OperatiOn
BEFORE STARTING
OPERATION
GETTING ON OR OFF THE MACHINE
• Do not jump on or down from the
machine. Never attempt to get on or off
the moving machine.
• When getting on or off the cab, first fully
open the door to the locked position
and check that it does not move.
BEFORE STARTING OPERATION
• Climb up/down the steps holding the
handrail to support your weight in a
three point secure stance (hand and
feet).
• Never use the safety lock lever or
control levers as hand holds.
WALK-AROUND INSPECTION
Perform the walk-around inspections once a
day before starting the engine for the first
time that day.
Refer to “MAINTENANCE, Walk-around
inspection”, on pages 5-16 and 5-17.
DAILY INSPECTION
Perform the daily inspections once a day
before starting the engine for the first time.
Refer to “MAINTENANCE, Daily inspection”,
on pages 5-18 to 5-23.

Takeuchi TB216 Specifications

General

Engine Make	Yanmar
Engine Model	3TNV70
Transport Width	980 mm
Bucket Capacity	0.04 m³
Maximum Reach	4, 040 mm
Max Reach at Ground Level	3, 980 mm