2-6
Controls
COVERS
STARTER KEY
COVERS
The starter key is used to start and stop the
engine, as well as to lock and unlock the
following components:
• Fuel lid
• Manual storage compartment
• Engine hood
• Covers
MAINTENANCE COVER
When opening the maintenance cover,
make sure that the safety lock lever is in
the lock position and the engine is
stopped.
Open this cover to perform a maintenance
operation of the engine or to switch the
selector valve
Opening
1. Insert the starter key and turn it
counterclockwise to unlock the
maintenance cover (1).
Closing
1. Close the maintenance cover (1).
2. Insert the starter key and turn it clockwise
to lock the maintenance cover (1).
To Next Page
Loading...
