Takeuchi TB216 User Manual

5-15
Maintenance
MAINTENANCE LIST
Inspection and maintenance item Page
Every 500 hours
Replacing the hydraulic oil return filter 5-40
Replacing the water separator filter 5-40
Replacing the fuel filter 5-41
Every 1000 hours
Replacing the travel motor gear oil* 5-42
Cleaning the engine cooling system 5-42
Replacing the air cleaner element 5-44
Inspecting and adjusting the engine valve clearance 5-45
Retightening the engine cylinder head bolt 5-45
Every 1500 hours
Inspecting and cleaning the engine fuel injectors 5-46
Inspecting the crankcase breather system 5-46
Every 2000 hours
Lapping the engine valve seats 5-47
Every 4000 hours
Replacing the hydraulic oil and cleaning the suction strainer 5-48
When required
Replacing the bucket teeth 5-50
Replacing the bucket 5-52
Lubricating the levers 5-54
Inspecting the rubber crawlers 5-55
Replacing the rubber crawlers 5-56
*: If the percentage of the traveling time within the total operating time is high, replace the gear
oil earlier than the specified time.

Takeuchi TB216 Specifications

General

Engine Make	Yanmar
Engine Model	3TNV70
Transport Width	980 mm
Bucket Capacity	0.04 m³
Maximum Reach	4, 040 mm
Max Reach at Ground Level	3, 980 mm