Taylor-Dunn E-451 - Page 101

Replacement Parts
Page 101
* Not available at time of printing
ME-45X-01
E-451 & E-457
Motor Speed Control
Item No. Part No. Description Qty
1 62-205-00 Motor speed control (E 4-51) 1
62-205-40 Motor speed control (E 4-57) 1
2 72-501-43 Forward or Reverse solenoid (E 4-51) 2
72-501-39 Forward or Reverse solenoid (E 4-57) 2
3 72-501-42 ISO solenoid (E 4-51) 1
72-501-38 ISO solenoid (E 4-57) 1
4 79-840-00 Circuit breaker 1
5 88-818-06 #8 x 1/2 Pan head screw 2
6 79-829-10 Fuse, E 4-57 1
79-829-15 Fuse, E 4-51 1
7 88-818-06 #8 x 1/2 Pan head screw 2
8 73-002-00 Horn (24v/36v) 1
9 88-838-06 #14 x 1/2 Pan head screw 2
10 88-838-06 #14 x 1/2 Pan head screw 4
11 01-534-80 Mounting plate (E 4-51) 1
01-534-91 Mounting plate (E 4-57) 1
12 88-080-11 5/16 X 1 NC Hex head screw 4
13 88-088-62 5/16 Split lock washer 4
14 88-089-80 5/16 NC HEX NUT,S/S 8
15 88-838-06 #14 x 1/2 Pan head screw 3
16 75-235-26 Jumper 2
17 61-838-42 Buss bar (small) 2
18 61-838-41 Buss bar (large) 2
19 88-099-91 5/16 NF THIN PATTERN NUT 10
88-088-63 5/16 LOCK WASHER,INT TOOTH 10
Not Shown 75-148-25 Control Harness 1
78-302-50 Resistor (on ISO solenoid) 1
75-224-14 TVS Diode (solenoid coils) 3