EasyManua.ls Logo

Taylor-Dunn E-451 - Preventative Maintenance

Taylor-Dunn E-451
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PM Schedule
Page 19
ME-45X-01
E-451 & E-457
Every Week
All daily items plus the following:
Battery electrolyte level (all cells).
Check all tires tread for debris.
Check rear tire pressure.
Check all interlocks.
Operation of throttle/brake treadle.
Operation of lights and horn.
Operation of steering.
Operation of operator presence switch.
Check for uid leaks.
First 20 hours
Re-torque the wheel nuts.
Every Month or 100 hours
All weekly items plus the following:
Check all safety warning labels.
Clean battery terminals.
Inspect front wheel bearings.
Inspect fork collar bearings.
Inspect steering chain tension.
Inspect hitch.
Every 3 Months or 300 hours
All monthly items plus the following Inspect and
adjust brake.
Clean battery compartment.
Inspect all hardware for tightness (rst 300 hours
then every 1,200 hours).
Lubricate the vehicle per lubrication schedule.
Re-torque wheel nuts.
Tighten all electrical connections.
Clean drive motor exterior.
Every 6 Months or 600 hours
All monthly items plus the following:
Inspect all electrical connections of signs of
overheating.
Inspect all wiring for cracks, fraying, or wear.
Inspect steering column and bell crank bearings.
Inspect frame for damage.
Test battery.
Inspect brake band and drum.
Every Year or 1,200 hours)
All 6 month items plus the following:
Clean and repack front wheel bearings.
Inspect and tighten all hardware.
Inspect motor brushes and blow out carbon.
Rotate rear tires.
Inspect rear wheel bearings.
Every 2 Years or 2,000 hours
All yearly items plus the following:
Flush and replace the transaxle oil.

Table of Contents

Related product manuals