Lubrication
Page 26
E-451 & E-457
ME-45X-01
LUBRICATION AND FLUIDS CHART
Assembly Component # Capacity Lubricant
Front Axle:
1: Fork Bearings 1 - NLGI Grade 2 lithium multi-purpose grease
5: Wheel Bearing 2 - NLGI Grade 2 lithium high temp Bearing Grease
Brake Fluid:
Master Cylinder 1 DOT 3, Meets or exceeds SAE J1703
Linkages:
4: Pedal 3 - NLGI Grade 2 lithium multi-purpose grease
Rear Transaxle:
6: Primary Reduction 1 1 pint SAE 140 weight API GL5 Hypoid Gear Oil
7: Drain Plug (ref) - - -
8: Level Plug (ref) - - -
9: Fill Plug 1 2 quarts SAE 140 weight API GL5 Hypoid Gear Oil
HAZARDOUS WASTE DISPOSAL
This vehicle contains various components and/or uids that may be classied as hazardous waste.
This includes but is not limited to Lead, Acid, Oil, Grease.
The brake linings originally installed by the factory do not contain asbestos. However, since it is possible that
asbestos brake linings were installed as replacement parts, brake linings should be handled as hazardous
waste.
The requirements for disposal of hazardous waste vary by location. Consult your local regulations regarding
the proper disposal of hazardous waste products.
To Next Page
Loading...
