TC Electronic SYSTEM 6000 MKII Algorithm Manual

18
vss™-M4
Hi Soften
Range:-50to+50
Hi Soften is a complex filter used to shape the high
frequency spectrum of the Reverb diffused field. Hi Soften
isscaledwithHiCutandHiDecay.Asettingof“0”denotes
a default setting.
Decay
Lo Decay
Range:0.01to2.5
Decay multiplier related to Master Decay, for frequencies
below the Lo Xover setting.
Example:WhenaDecaymultiplierissetat1.25andthe
MasterDecayis2.0sectheresultingdecaytimewillbe2.5
seconds.
LoMid Decay
Range:0.01to2.5
Decay multiplier related to Master Decay, for frequencies
above the Lo Xover setting.
Example:WhenaDecaymultiplierissetat1.25andthe
MasterDecayis2.0sectheresultingdecaytimewillbe2.5
seconds.
HiMid Decay
Range:0.01to2.5
Decay multiplier related to Master Decay, for frequencies
above the Mid Xover setting.
Example:WhenaDecaymultiplierissetat1.25andthe
MasterDecayis2.0sectheresultingdecaytimewillbe2.5
seconds.
Hi Decay
Range:0.01to2.5
Decay multiplier related to Master Decay, for frequencies
above the Hi Xover setting.
Example:WhenaDecaymultiplierissetat1.25andthe
MasterDecayis2.0sectheresultingdecaytimewillbe2.5
seconds.
Lo Xover
Sets the Cross-over frequency between the Lo and LoMid
Decay.
Mid Xover
Sets the Cross-over frequency between the LoMid and
HiMid Decay.
Hi Xover
Sets the Cross-over frequency between the HiMid and Hi
Decay.

TC Electronic SYSTEM 6000 MKII Specifications

General

Brand	TC Electronic
Model	SYSTEM 6000 MKII
Category	Computer Hardware
Language	English