4
InTrODuCTIOn
System 6000 contains a wealth of algorithms, and the list
of algorithms will continuously be extended. Our main focus
is to offer the best possible quality - both as stereo- and
multi-channel versions.
Mainframe 6000 holds
• OneSceneFactorypresetbankwithupto50presets
• OneRoutingFactorypresetbankwithupto50presets
• Upto14EngineFactorypresetbankswithupto99
presets each.
Bank Bank Name Algorithms used
F1 : Reverb A - (Music St.) VSS-3
DVR-2
F2 : Reverb B - (Music St.) VSS-4HD
NonLin2
VSSM4
F3 : Reverb(MusicSur.) Spacepan-5.1
VSS 6.1 Reverb
VSS-5.1Reverb
VSS-5.1Source
F4 : HallsofFame AllReverbtypes+
Reflector
F5 : ReverbA-(Film) VSS-3
F6 : ReverbB-(Film) VSS-3
VSS-M4
VSS4 HD
F7 : ReverbC-(Film) Reflector6
Nonlin
F8 : Reverb(FilmSur.) SpacePan-5.1
Reflector 6
VSS-5.1Reverb
VSS-5.1Source
VSS-6.1 Reverb
VSS Surround
F9 : Mastering EQ5.1
MDWHiResEQ
MDWHiRes5.1
De-Ess,Brickwall2
MD 3, MD4
Matrix 88
F10 : Mastering EQ-5.1,MD-3,
MD-5.1,Toolbox-5.1,
Engage,BackDrop,
UnWrapHD
F11 : Monitor&Format Toolbox5.1,Engage,
Unwrap,Backdrop,
F12 : Delay&Effects VP-2,VP-8,Delay-1,
Delay-2
F13 : Metering LM6
F14 : M5000 Rev-2,Rev-3,
CORE-2,Chorus-1,
Delay-1, Delay-2,
Phaser-1
Channel Distribution In
Surround Algorithms
To best comply with the channel allocation used by most
digitalAES-formatequipmenttheInput/Outputchannelson
surround algorithms are allocated as follows:
1 Left
2 Right
3 Center
4LFE
5LeftSurround
6 Right Surround
These channel allocations comply with the following
standards:
• ITU-RecommendationITU-RBR.1384,Parametersfor
InternationalExchangeofMultichannel
SoundRecordings,1998
• SMPTE320M-1999,forTelevision-Channel
Assignments and Levels on Multichannel Audio Media
• SurroundSoundForumRecommendedPractice
SSF-02/1-E-2(3-5-99),MultichannelRecordingFormat,
Parameters for Programme Interchange and
Archiving,AlignmentofReproductionEquipment
Grouping the Inputs/Outputs this way ensures optimal
flexibility for further external processing and archiving,
whenworkingonsetupsfollowingtheabovementioned
standards.
It is, however, worth noticing that total routing-flexibility of
physicalInputs/OutputstoEngineInputs/Outputsis
available on System 6000 via the Routing page.
Metering In the Engine Edit Pages
Forlogicalchannelmeteringinthevarioussurround
algorithms,themetersontheEngineEditpagesare
displayed in the following order.
Left-Center-Right-Surr.Left-Surr.Right-LFE
WebelievethatbydisplayingthemetersontheEngine
Editpagesinthesameorderasyourspeakersare
physically placed, the most intuitive metering of
channel-levels is achieved.