69
TOOlbOX - 5.1
Output Format
Range:5.1(=OfforThru),LCRS,StereoorMono
Selects the Output format in which your five main channels
Input material will be mixed down to.
90º Mono
90degreesmonoInsert.Thisoptionisplacedjustbefore
thetwoLimiters,meaningatLFr+RFrwhenOutputformat
issettoMono,andLSr+RSrchannelswhenLCRSis
selected as Output format.
Mono Output
Range:Center,LFr+RFr
Selects the Output channel when Mono is selected as
Output format.
Mix Levels
From L/R
Range: -100dB to 0dB
Sets the Input level from the Left and Right front channels.
This parameter is only available when Output is set
to Mono or Stereo.
From Center
Range: -100dB to 0dB
Sets the Input level from the Center channel.
This parameter is only available when Output is set
to Mono or Stereo.
From SL/SR
Range: -100dB to 0dB
Sets the Input level from the Left and Right surround
channels.
Output limiter
TwochannelsofbroadbandOutputbrickwalllimiter,that
are placed differently according to the selected Output
format.
Output format: 5.1 Thru
The Limiter is inactive.
Output format: LCRS
The Limiter operates on the LS and SR channels.
Output format: Stereo
The Limiter operates as a Stereo Limiter on Left and Right
front channels.
Output format: Mono
The Limiter operates on the Mono sum Output.
Threshold
Range: -12 to 0dB
Limiter Threshold level for the two limiters available. The
LimiterswillbeplacedatLFr+RFrOutputswhenStereo
orMonomodeisselectedasOutputformats,andatLSr+
RSr when LCRS is selected as Output format.
Release
Range: 10 to 1000 ms
Sets the Release time for the selected Limiter.
Bass Page
Bass Management
Range:Extract,Distribute,Inactive
WhentheLFEModeparameterissettoDistribute,the
BassManagementenablesyoutoaddLFEinformationto
the six Output channels in the system. This can normally
becomparedtoa5.1->5.0process,butitcanalsobea
5.1->5.1process,leavingtheLFEchannelunprocessed,
whileaddingLFEinformationtothefiveMain-channels.
TheBassManagementisplacedjustbeforetheOutput
Formatconversion.
Main Channels
Lo Cut
Range: 10 - 200Hz
Sets the frequency for the Lo Cut filter, on the five main
Outputchannels(LFr,RFr,Cen,LSr,RSr)
Order
Range: Off, 2nd, 4th order
Sets the slope of the Main channels Lo Cut filter.
LFE Channel
Hi Cut
Range: 10 - 200Hz
SetsthefrequencyfortheHiCutfilterontheLFEchannel.
Order
Range: Off, 2nd, 4th order
SetstheslopeoftheLFEHiCutfilter.