TC Electronic SYSTEM 6000 MKII Algorithm Manual

63
MD 5.1
Output
Trim Levels
Output trims
Range: 0dB to -12dB in 0.1dB steps
Level trim of the Output channels. Only the fader is placed
after these trims. These parameters can be used to trim the
levels of the monitoring system, but please note that it also
affects the recorded material.
Mute
Allows muting of each Output-channel.
Output Fader
Range: Off to 0dB
(<-40dB:in3dBsteps,>-40in0.5dBsteps)
Output fader for all 6 Outputs. Can be controlled with the
optionalTCMasterFaderconnectedtotheGPIInput.
Compare
EasyswitchableOn/OffcomparefunctionfortheentireMD
5.1algorithm.Thisisnotabypassfunctionasyouareable
to set a Compare Level (see below).
Compare Level
Range: -20 to 0dB
This function allows you to set a Compare level of the
processed signal to match the unprocessed signal for
better A/B listening.

TC Electronic SYSTEM 6000 MKII Specifications

General

Brand	TC Electronic
Model	SYSTEM 6000 MKII
Category	Computer Hardware
Language	English