4. PROGRAMMING OPERATIONS EO1-11148
4.5 Cashier Code and Name Programming (Submode 2)
4- 9
*HALO/LALO (This setting will be effective as amount limit at the payment.)
HALO (High Amount to be Locked Out) LALO (Low Amount to be Locked Out)
0: No limit 0: No limit
1: 1 digit (0 to 9) 1: 1 digit (1 to 9999999)
2: 2 digits (0 to 99) 2: 2 digits (10 to 9999999)
3: 3 digits (0 to 999) 3: 3 digits (100 to 9999999)
4: 4 digits (0 to 9999) 4: 4 digits (1000 to 9999999)
5: 5 digits (0 to 99999) 5: 5 digits (10000 to 9999999)
6: 6 digits (0 to 999999) 6: 6 digits (100000 to 9999999)
7: 7 digits (0 to 9999999) 7: 7 digits (1000000 to 9999999)
**Cashier Security Code Table
Security Code Table 1
0 1 2 3 4 5 6 7
Prohibition of Returned Merchandise Operation O O O O
Prohibition of Correct Operation (NOTE 6) O O O O
Prohibition of No-Sale Operation O O O O
Security Code Table 2
0 1 2 3 4 5 6 7
Prohibition of Paid-Out Operation O O O O
NOTES: 1. In each item setting, depressing the [AT/TL] key without data entry skips to the next
item setting.
2. Entering 2 digits of numeric code provides an alphanumeric character of Cashier Name.
Therefore, odd number of numeric digit entry will cause an error. When less than 36
digits of numeric data are entered, this ECR uses space code entry. If a Cashier
Name includes spaces at the beginning, entering space code is required at the
beginning of data entry. For the Cashier name, up to 18 regular-sized or 9 double-
sized characters can be entered. Also a combination of both types can be entered.
3. If you enter “000”, this ECR is released from the Pass Code system.
4. When “1: Supervisor” is set as cashier status with a pass code, the cashier can always
interrupt other cashiers. When a cashier requires to perform prohibited operations, the
cashier programmed as Supervisor can release the prohibition by SIGN-IN, resulting to
perform any operations.
5. After selecting Cashier for Training Entry, a cashier can operate the same transaction
entries as those in the REG mode. The data in the training mode is not processed,
therefore, not affect any actual sales data in business. “TRAINING” as header will be
printed on the receipt.
6. After “Prohibition of Correct Operation” is set, Void and All Void operations will be
invalid.
To Next Page
Loading...
Need help?
General
