4. PROGRAMMING OPERATIONS EO1-11148
4.20 Manager Pass Code Programming (Submode 39)
4-27
Key Operation: Control Lock: SET, Enter 38 and depress the [#/NS] key.
[0] [1] [#/NS] ([+] key)
[5] [0] [AT/TL] (Preset Amount)
[3] [AT/TL] (HALO digit)
[1] [AT/TL] (Tax Status (Non-taxable))
[0] [2] [#/NS] ([-] key)
[1] [0] [0] [AT/TL] (Preset Amount)
[4] [AT/TL] (HALO digit)
[1] [AT/TL] (Tax Status (Non-taxable))
[#/NS] (To complete this submode.)
4.20 Manager Pass Code Programming (Submode 39)
Manager Pass Code in Z mode or SET mode can be programmed here, which restricts the access to Z,
and SET modes only for a manager.
NOTE: Do not forget your Manager Pass code. When it is forgotten, there are no solutions and
even dealers can do nothing.
Anytime outside a sale
Control Lock: SET
39 [#/NS] |Mode Code
| [#/NS] |Pass Code| [AT/TL] [#/NS]
NOTE: If you enter “0000”, the ECR is released from Pass Code System.
Example) To program the following Manager Pass Codes.
Pass Code in Z mode: 0101
Pass Code in SET mode: 0202
Key Operation:
Control Lock: SET, Enter 39 and depress the [#/NS] key.
[0] [1] [#/NS] (Z mode)
[0] [1] [0] [1] [AT/TL] (Pass Code)
[0] [2] [#/NS] (SET mode)
[0] [2] [0] [2] [AT/TL] (Pass Code)
[#/NS] (To complete this submode.)
2 digits (01 or 02)
01: Z mode
02: SET mode
4 digits
(0000 to 9999)
(See NOTE below.)
Repeat for the other Pass Code.
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
24-01-2002 #0000
PRG 38
01-01 0.50
-02 3
-03 1
02-01 1.00
-02 4
-03 1
0041 15:24TM
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
24-01-2002 #0000
PRG 39
01-01 0101
02-01 0202
0042 15:24TM
OPERATION
CONDITION
To Next Page
Loading...
