TEC MA-1535 series - Zone Accumulated PLU Report

3. READ (X) AND RESET (Z) REPORTS EO1-11148
3.3 Report Samples
3-24
3.3.12 Zone Accumulated PLU Report
Control Lock: X
⏐Zone start PLU No
.⏐ [#/NS] ⏐Zone end PLU No.⏐ [#/NS] 213 [AT/TL]
NOTES: 1. When entered Zone start/end PLU No. does not exist, the ECR will find the next PLU No.
2. Printing will be cancelled by depressing the [C] key during report print.
3. This report can be taken only when the PLU accumulation feature is selected.
OPERATION
15-11-2001 #1234
GTX 213
************************
PLU REPORT
************************
PLU0000000000004
6 9.00
85
PLU0000000000005
7 21.00
86
PLU0000000000006
20 90.00
78
PLU0000000000007
8 32.00
88
0099 12:10TM
When Department and PLU Sales Ratio on
Reports is NOT programmed in Print Item on
Reports Setting
When Department and PLU Sales Ratio on
Reports is programmed in Print Item on
Reports Setting
15-11-2001 #1234
GTX 213
************************
PLU REPORT
************************
TOTAL 368.50
PLU0000000000004
6 9.00
2.44% 18.91%
85
PLU0000000000005
7 21.00
5.7% 44.12%
86
PLU0000000000006
20 90.00
24.42% 89.64%
78
PLU0000000000007
8 32.00
8.68% 68.38%
88
0099 12:10TM