13. SPECIFICATIONS EO1-11148
13. SPECIFICATIONS
13- 1
13. SPECIFICATIONS
Item Description
Size 410 mm (width) x 430 mm (depth) x 335 mm (height) (height including
rubber feet)
Weight 12.5 kg
Power Requirement: AC 117V±10%, 60 Hz±10%, 0.46A
AC 220 – 230V±10%, 50/60Hz±10%, 0.24A
AC 240V±10%, 50/60Hz±10%, 0.20A
Ambient Temperature 0°C to 34°C
Relative Humidity 10% to 80% (No condensation)
Memory Protection
Long lasting rechargeable lithium battery is provided.
Paper Width 57.5±0.5mm
Outer Roll Diameter Max. ∅80mm
Thermal paper rolled with the print side facing outside. Paper Type
Only paper rolled onto a core is acceptable, however, the paper end
should not be pasted to the core.
Recommended paper type:
KF50 (KANZAN)
TF50KS-E2C (Nippon Paper Industries)
P-350 (KSP)
• Do not store the paper for longer than the manufacturer’s recommended shelf life.
• Store the paper in a cool, dry place. Avoid areas where they would be exposed to direct sunlight,
high temperature, high humidity, dust or gas.
• A contact of chemical or oil may discolour or erase the printed record.
• Rubbing the paper hard with nail or hard object may discolour the paper.
• The paper end should not be pasted to the core.
For further information please contact your authorised TOSHIBA TEC representative or authorised
paper manufacturer.
CAUTION!
Use only paper which meets specified requirements. Use of non-specified paper may shorten
the head life of the printer, resulting in problems with print quality, cause a paper feed failure o
To Next Page
Loading...
Need help?
General
