4. PROGRAMMING OPERATIONS EO1-11148
4.9 Date Setting or Adjustment (Submode 6)
4-18
4.9 Date Setting or Adjustment (Submode 6)
Anytime outside a sale
Control Lock: SET
06 [#/NS] |Day
| |Month| |Year| [AT/TL] [#/NS]
(01 to 31) (01 to 12) (00 to 99)
NOTE: The date entry order may be Month-Day-Year or Year-Month-Day instead of Day-Month-Year
by programmable option. For details, please contact your TOSHIBA TEC representative.
Example) To set date “January 24, 2002”.
Key Operation:
Control Lock: SET, Enter 06 and depress the [#/NS] key.
[2] [4] [0] [1] [0] [2] [AT/TL]
[#/NS]
4.10 Department Group Name Programming (Submode 13)
The Name of Department Group can be programmed here.
Anytime outside a sale
Control Lock: SET
13 [#/NS] |Group Code
| [#/NS] Character entry [AT/TL] [#/NS]
NOTE: Entering 2 digits of numeric code provides an alphanumeric character of Department Group
Name. Therefore, odd number of numeric digit entry will cause an error. When less than
36 digits of numeric data are entered, this ECR uses space code entry. If a Department
Group Name includes spaces at the beginning, entering space code is required at the
beginning of data entry. For the Department Group name, up to 18 regular-sized or 9
double-sized characters can be entered. Also a combination of both types can be entered.
Example)
To program the following names to the respective Groups:
Group 1
Group 2
Group 3
OPERATION
CONDITION
OPERATION
CONDITION
2 digits (01 to 09)
Max. 18 characters
(See NOTE below.)
Repeat for other Groups. (Max. 9 groups)
D P G P # 0 1
D P G P # 0 2
OT H ER
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
01-01-2002 #0000
PRG 06
01-01 240102
0020 13:33TM
To Next Page
Loading...
Need help?
General
