3. READ (X) AND RESET (Z) REPORTS EO1-11148
3.3 Report Samples
3-21
3.3.9 Zone PLU Report
Control Lock: X
⏐Zone start PLU No
.⏐ [#/NS] ⏐Zone end PLU No.⏐ [#/NS] 13 [AT/TL]
NOTES: 1. When the entered zone start/end PLU No. does not exist, the ECR will find the next PLU
No.
2. Printing will be cancelled by depressing the [C] key during report print.
OPERATION
15-11-2001 #1234
X
13
************************
PLU REPORT
************************
PLU0000000000004
6 9.00
85
PLU0000000000005
7 21.00
86
PLU0000000000006
20 90.00
78
PLU0000000000007
8 32.00
88
0099 12:10TM
When Department and PLU Sales Ratio on
Reports is NOT programmed in Print Item on
Reports Setting
When Department and PLU Sales Ratio on
Reports is programmed in Print Item on
Reports Setting
15-11-2001 #1234
X
13
************************
PLU REPORT
************************
TOTAL 368.50
PLU0000000000004
6 9.00
2.44% 18.91%
85
PLU0000000000005
7 21.00
5.7% 44.12%
86
PLU0000000000006
20 90.00
24.42% 89.64%
78
PLU0000000000007
8 32.00
8.68% 68.38%
88
0099 12:10TM