4. PROGRAMMING OPERATIONS EO1-11148
4.16 PLU Cashier Report Setting (Submode 35)
4-23
NOTES: 1. To delete a string of key operations once set on a FUNCTION key, operate as follows.
34 [#/NS] [FUNCTION] [FUNCTION] [#/NS]
2. Neither [C], [RF], [JF] nor [FUNCTION] keys can be set in a string of keys in the
setting operation above.
3. None of [FUNCTION] keys themselves can be contained in a string of keys for any
[FUNCTION] key.
4. The [FUNCTION] key should be set beforehand. For details, please contact your
TOSHIBA TEC representative.
Example) To set the following key operation as [FUNCTION 1] key:
100 [DEPT 1] [ST] [AT/TL]
Key Operation:
Control Lock: SET, Enter 34 and depress the [#/NS] key.
[FUNCTION 1]
[1] [0] [0] [DEPT 1] [ST] [AT/TL]
[FUNCTION 1]
[#/NS]
4.16 PLU Cashier Report Setting (Submode 35)
Up to 40 PLUs can be set to output to the Cashier Report.
Anytime outside a sale
Control Lock: SET
35 [#/NS] |PLU Select No.
| [#/NS] |PLU Code| [AT/TL] [#/NS]
Example) To set the following PLUs to be output to the Cashier Report:
No.01: PLU Code 1000000010101
No.02: PLU Code 1000000010102
Key Operation:
Control Lock: SET, Enter 35 and depress the [#/NS] key.
01 [#/NS]
1000000010101 [AT/TL]
02 [#/NS]
1000000010102 [AT/TL]
[#/NS]
Same key
Repeatable for other FUNCTION keys
whose string of keys are to be deleted.
OPERATION
CONDITION
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
24-01-2002 #0000
PRG 34
FC01 1
0
0
DP01
FCA3
TD01
0037 15:15TM
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
24-01-2002 #0000
PRG 35
01-01 1000000010101
02-01 1000000010102
0038 15:17TM
2 digits (01 to 40)
Max. 13 digits
Repeat for other PLUs.
To Next Page
Loading...
Need help?
General
