4. PROGRAMMING OPERATIONS EO1-11148
4.21 Register No. Setting (Submode 43)
4-28
4.21 Register No. Setting (Submode 43)
4-digit numbers can be set as Register ID No. Once set, it will be printed on journal and every receipt.
Anytime outside a sale
Control Lock: SET
43 [#/NS] 01
[#/NS] |Register No.| [AT/TL] [#/NS]
Fixed
Example) To set 1234 as Register No.
Key Operation:
Control Lock: SET, Enter 43 and depress the [#/NS] key.
[0] [1] [#/NS]
[1] [2] [3] [4] [AT/TL]
[#/NS] (To complete this submode.)
4.22 PLU Stock Loading or Changing (Submode 90)
This Submode loads or changes the stock quantities of PLUs.
Anytime outside a sale
Control Lock: X or Z
90 [ST] |PLU Code
| [PLU] |Stock Quantity| [R/A] or [LOAN] [ST]
[PO] or [PICK-UP]
NOTE: PLU programming should be done before this operation.
Example) To change the stock quantity of the following PLU.
Key Operation
: Control Lock: X or Z, Enter 90 and depress the [ST] key.
1000000010101 (PLU Code)
[PLU]
20 (Stock Quantity)
[R/A] or [LOAN] (When adding the stock quantity.)
[ST] (To complete this submode.)
OPERATION
CONDITION
4 digits (0000 to 9999)
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
24-01-2002 #0000
PRG 43
01-01 1234
0046 15:37TM
OPERATION
CONDITION
(0.001 to 9999.999)
Repeat for other PLUs.
(When adding the
stock quantity.)
(When subtracting
the stock quantity.)
To Next Page
Loading...
Need help?
General
