7. CASHIER SIGNING OPERATIONS EO1-11148
7.3 Cashier Interrupt Operation
7- 4
(1) Sale item entries started by Cashier 1.
(2) Switching Cashier 1 to Cashier 2 (interruption by Cashier 2)
(3) Sale item entries by Cashier 2
(4) Switching Cashier 2 to Cashier 3 (interruption by Cashier 3)
(5) Sale item entries and finalization by Cashier 3
(6) Switching Cashier 3 to Cashier 2
(7) Cashier 2 resumes his/her own entries and finalizes the sale.
(8) Switching Cashier 2 to Cashier 1
(9) Cashier 1 resumes his/her own entries and finalizes the sale.
Operation Example 3 (Multi-time Interruption)
(1) Sale item entries started by Cashier 1
(2) Switching Cashier 1 to Cashier 2 (interruption by Cashier 2)
(3) Sale item entries and finalization by Cashier 2.
(4) Switching Cashier 2 to Cashier 1
(5) Cashier 1 resumes his/her own entries
(6) Switching Cashier 1 to Cashier 3 (interruption by Cashier 3)
(7) Sale item entries and finalization by Cashier 3.
(8) Switching Cashier 3 to Cashier 1
(9) Cashier 1 resumes his/her own entries and finalizes the sale.
NOTES: 1. Whether the Cashier Interrupt Operation is allowed or not is determined by program
option selection. A maximum of 3 cashiers are acceptable in a sale (i.e. up to 2 cashiers
can interrupt a sale started by another cashier.)
2. The Cashier Interrupt Operation is available only in the Receipt-Off mode. If the “R
OFF” lamp is unlit, depress the [LOG/RECEIPT] key to illuminate the lamp.
3. When the sale-starting Cashier code is changed to another Cashier code, the display
shows the initial status (0.00).
4. When interrupting entries are completed and the interrupting Cashier is switched to the
Cashier under which a sale entry has been suspended, the subtotal amount of the
suspended sale is displayed.
Cashier 1
Cashier 2
Sale Finalization
(2) Cashier 1 Æ Cashier 2
Sale Finalization
(3)
(1)
(5)
(4) Cashier 1 Å Cashier 2
(6) Cashier 1 Æ Cashier 3
Cashier 3
Sale Finalization
(7)
(8) Cashier 1 Å Cashier 3
(9)
To Next Page
Loading...
Need help?
General
