8. INSTALLING AND REPLACING THE RECEIPT AND JOURNAL ROLLS EO1-11148
8.2 Installing/Replacing the Journal Roll
8- 3
4. Insert the paper end into the slit of the Take-up Reel
and wind it around the reel two or three times.
Then, set the Support Plate.
5. Set the Journal Take-up Reel Ass’y into the Reel
Holder.
6. Attach the Printer Cover. After that, depress the
[#/NS] key to check the print condition.
CAUTION: Be sure to attach the Printer Cover to the
Top Cover tightly.
NOTE: E25 error is released by the [C] key.
To Next Page
Loading...
