33.2 Uploading Welcome Screens to COM3000
Determine Card to use:
➢ Log into a COM51card not currently running EPG
➢ Navigate to the COM51 Pairing info tab
➢ Upload welcome images one at time to the cards tftp section as shown below in Figure 63.
Figure 63 Upload File to COM51 TFTP
Select EPG tab
➢ Enter the IP address and port# of the QAM you want to use to stream the welcome screen.
➢ Enter 2 in the Mode field.
➢ Enter the IP address of card you are using for FTP
➢ Paste or enter the name of the file you uploaded to the COM51 TFTP.
➢ Click Submit.
➢ Reboot the COM51. When the reboot is complete the card’s EPG page will look like Figure 64
below:
Figure 64 - Upload Welcome Screen Image to EPG
To Next Page
Loading...
