Filename - This value entered in this field tells the COM51 which file to download (in the case
of software updates and license files), or what name you want to give the log file being
transferred from the card.
Mode – Must be set for TFTP
24.8 COM51 User Configuration Options
This section gives you the ability to customize select features of the COM51 cards to better suit
your application.
➢ Change IP settings the card
➢ Control and configure Syslog server
➢ Enter IP address of NTSC-8 and Tuner Count
Figure 41 - User Config Interface
Following is a brief explanation of each field shown above:
IP_Config - This field allows for one of 3 methods of IP address assignments to be chosen.
The default IP_Config setting is 0. Which sets the card one in chassis one to 192.168.3.18.
See Section 17.2 Setting up Multiple Chassis.
0 = Default - In this mode the IP address is assigned to the card based on the chassis ID
and slot the card is currently in. The formula for this address is 192.168.3.[1 + (chassis
ID X 16) + slot number]
In the default IP mode the Base_IP and the Gateway fields are ignored. The Subnet field
is also ignored but the Subnet mask is set to 255.255.0.0 and is applied.
1 = DHCP_Persistent - In this mode all IP address information Base_IP, Subnet and
Gateway are taken from the DHCP lease that the DHCP server issues to the card and is
stored in non-volatile memory.
To Next Page
Loading...
Need help?
General
