34 QAM20
The QAM 20 setup is very different than the QAM6 COM 2000 unit. Output RF channels can be
assigned to induvial QAMs and the setup has been streamlined.
34.1 Accessing the QAM Page
The QAM tab of the COM51 user interface can be accessed in one of two ways:
➢ From the Overview Page QAM summary click on the QAM IP address hyperlink as shown in
Figure 67 - QAM Summary Hyperlink
➢ From the QAM tab of the COM51 user interface enter the IP address of the QAM in the field and
click Submit as shown in Figure 68.
Figure 68 - QAM Tab IP entry
To Next Page
Loading...
