Technics SC-S2350 - Using the Remote Control

| Using the remote control
This remote contro! can be used to operate the receiver you purchased and some other Panasonic and Technics cassette decks, CD players,
TVs, VCRs, and DVD players, provided they are equipped with a remote control sensor.
it is also possible to change-over the remote control code so that the remote control can operate TVs and VCRs which have not been
manufactured by this company. (> page 50)
. iS
To
operate
the
receiver
|
|
To turn the receiver
ON/OFF
TUNER?
TAPE VCR TY DYD CD
Point the remote control toward the To select an input GC) Ge) CJ (3
receiver source and switch the Note]
remote control to each
i A f ,
operation mode PHONO can not be selected with this remote control.
e TAPE MONITOR cannot be controlled with the [TAPE]
button.
To turn on the STEREO
STEREO mode
To turn on the SURROUND
SURROUND mode O
Changes as follows each time the button is
SFC pressed.
To turn SFC on and
select the desired mode HALL — CLUB — LIVE — THEATER
SIM SURR (SIMULATED)
TEST
Eoy i: a To output a test signal (5) _ Press once more to stop the signal.
DELAY LEVEL —
A
= 5 = e To select the speaker
channel and adjust its When the SURROUND or SFC modes are on
You can adjust the level of the center and surround speakers
NO) eje
output
level
and
the
subwoofer.
E
G
E
E
o
E:
E
S
2
E
3
œŒ
44
si = a + When the STEREO mode is on
You can adjust the level of the subwoofer.
When the SFC mode is on
To change the surround
channel
delay
time
DELAY
>
-
+
The message “MUTING ON NOW” runs
repeatedly trom right to left across the display as
long as the muting function is on.
Press once more to return to the original volume.
MUTING
To mute the sound level
To adjust the volume
level
ROTS5333