TechniSat DIGITRADIO 1 User Manual

38
7.2.1 Carrying out a full scan
The automatic Full Scan scans all DAB+ Band III channels and thus finds every
station being broadcast in the reception range.
When the scan has finished, the first station in alphanumeric order will be played.
> To carry out a full scan, open the menu by pressing the MENU button and use
the t, u and OK buttons to select [Full Scan].
> [Scanning...] appears in the display.
During the scan, a progress bar and the number of stations found are displayed.
If no stations are found, check the telescopic aerial and change the location of
the device if necessary (Sections 5.3.3 / 3.2.1).
7.2.2 Selecting a station
> To select a DAB+ station, press the t or u buttons and confirm the station
selection with OK.

TechniSat DIGITRADIO 1 Specifications

General

Package type	Box
Package depth	50 mm
Package height	170 mm
Package weight	514 g
Projection	-
Antenna type	External
Product color	Black, Silver
Headphone outputs	1
Headphone connectivity	3.5 mm
RMS rated power	1 W
Storage temperature (T-T)	5 - 90 °C
Operating temperature (T-T)	5 - 35 °C
Battery capacity	1050 mAh
Battery life (max)	10 h
Input voltage	230 V
Power supply input voltage	5 V
AC input frequency	50 Hz
Display type	OLED
Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB, DAB+, FM
Cables included	USB

Weight and Dimensions

Depth	31 mm
Width	155 mm
Height	91 mm
Weight	276 g