52
9.2 Display brightness
You can set the display brightness for both operation and standby (only available if
the radio is connected to the mains).
> To do so, press the MENU button and use the t or u buttons to select the
[Brightness] entry.
> Press the OK button.
> Use the t or u buttons and then press the OK button to select one of the
following functions:
[Operation] controls the brightness in normal operating mode. Here you can
select from among the [High], [Medium] and [Low] brightness levels. Use the
t or u buttons to select a brightness level and press the OK button to save
this. The setting applies to both mains and battery operation.
[Standby] controls the brightness in standby mode (only applicable when the
radio is connected to the mains). Here you can select from among the [High],
[Medium] and [Low] brightness levels. Use the t or u buttons to select a
brightness level and press the OK button to save this.
To Next Page
Loading...
