TechniSat DIGITRADIO 1 User Manual

54
9.4 Factory settings
When you change the location of the device, e.g. if you move house, it is possible that
the stored stations can no longer be received. By resetting to the factory settings, you
can delete all the stored stations in this way and then run a new station scan.
> Press the MENU button and use the t or u buttons to select the [Factory
Settings] entry. Press the OK button.
> To apply the factory settings, use the t or u buttons to select the [Yes] entry,
then press the OK buttons.
All previously stored stations and settings will be deleted. The device will now
be in the status it was in when supplied.
> [Restarting...] now appears in the display and the device will start with the
language selection ([Language]). Use the t or u buttons to select one of the
available languages and confirm the selection by pressing the OK button. The
device then automatically runs a full scan in DAB mode. The display information
shows the progress during the scan, plus the number of digital radio stations
found. The first DAB+ station is played after the scan has finished.

TechniSat DIGITRADIO 1 Specifications

General

Package type	Box
Package depth	50 mm
Package height	170 mm
Package weight	514 g
Projection	-
Antenna type	External
Product color	Black, Silver
Headphone outputs	1
Headphone connectivity	3.5 mm
RMS rated power	1 W
Storage temperature (T-T)	5 - 90 °C
Operating temperature (T-T)	5 - 35 °C
Battery capacity	1050 mAh
Battery life (max)	10 h
Input voltage	230 V
Power supply input voltage	5 V
AC input frequency	50 Hz
Display type	OLED
Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB, DAB+, FM
Cables included	USB

Weight and Dimensions

Depth	31 mm
Width	155 mm
Height	91 mm
Weight	276 g