40
7.2.5 Overwriting/deleting a stored station location
> Simply save a new station to a favourites storage location as described.
If factory settings are applied, all storage locations will be deleted.
7.2.6 Signal strength
> Briefly press the MENU button and use the t or u buttons to select the
[Display] entry, then press OK.
> Use the t or u buttons to select the [Signal Strength] entry, then press OK.
> Exit the menu by pressing MENU several times.
> The signal strength is shown in the display via a bar diagram.
Stations with a signal strength below the necessary minimum signal strength
are not broadcasting a sufficiently strong signal. Align the telescopic aerial as
described in Section 5.3.3 if necessary.
To Next Page
Loading...
