53
[Auto Dim]: if the [On] option has been selected, this automatically dims
the display to the Low brightness level if the radio has not been used for 10
seconds. If the [Off] option has been selected, the display is permanently
illuminated at the brightness level selected under the [Operation] function.
Press the OK button to save the setting.
For battery operation, only the Operation and Auto Dim settings are
applicable. Standby mode (date and time appear in the display when switched
off) is only available is the device is connected to the mains.
9.3 Language
> Press the MENU button and use the t or u buttons to select the [Language]
submenu.
> Press the OK button.
> Use the t or u buttons to select one of the available languages and confirm
the selection by pressing the OK button.