44
8.2 FM (VHF) reception with RDS information
RDS is a process for transmitting additional information via VHF stations. Broadcasters
with RDS send their station name or programme type, for example. This appears in
the display. The device can display RT (radio text), PS (programme service or station
name) and PTY (programme type) RDS information.
8.3 Automatic station scan
> Hold down the t or u buttons for some time (2 to 3 sec.), to automatically
scan for the next station with a sufficiently strong signal.
> Alternatively you can also press the OK button.
If a VHF station with a sufficiently strong signal is found, the scan stops and the
station is played. If an RDS station is being received, the station name and radio
text (where available) appear.
Please use the manual station scan to search for stations with weaker signals.
To Next Page
Loading...
