28
8.1.2 Audio stream
In the case of digital radio, audio streams are continuous data streams which contain the MPEG 1 audio layer 2 frames and
thereby represent acoustic information. This enables standard radio channels to be broadcast and listened to on the receiver
side. Digital radio provides you not only with excellent sound quality radio but also additional information. This could relate to
the channel currently being broadcast (DLS e.g. track, artist) or be independent of this (e.g. news, weather, trac, tips).
8.2 DAB radio reception
> Press the MODE buon as oen as required until [DAB Radio] appears on the display.
Alternatively:
> Press the MENU buon and then select Main menu > DAB.
If you are in a submenu, first of all select the main menu as described in section 3.7.
If DAB is being started for the first time, a complete station scan is performed. The station list is then shown (see
Section 8.2.2).
8.2.1 Performing the station scan
The automatic scan [Complete scan] scans all DAB Band III stations and thereby finds all stations being broadcast
within the reception range.
Aer ending the scan, the first station in alphanumeric order will be played.
> In order to perform a complete scan, press the SCAN buon. [Scan] appears on the display. The scan starts and the
progress bar appears on the display.
> When completed, press p or q and OK to select a station.
Alternatively:
> Press the MENU buon and use p or q to select > Complete scan. Confirm by pressing OK.
If no station is found, check the antenna position and change the location if required. Check whether digital radio
stations are being broadcast in your area.
BDA DigitRadio 140.indd 28 16/04/2018 16:16
To Next Page
Loading...
Need help?
General
