TechniSat DIGITRADIO 140

45
EN
FR
IT
NL
NW
DK
PL
CZ
SK
13.3.6 Delete group
This menu item deletes the current group and releases all the devices added to the group again.
13.4 Using headphones
Do not listen to music at a high volume when using headphones. Doing so can cause permanent hearing impairment. Turn
down the radio volume to the lowest volume before using headphones.
> Only use headphones with a 3.5 mm jack plug.
> Insert the headphone connector in the headphone socket (12) on the front of the DIGITRADIO.
When the headphones are connected, the sound is played via the headphones and the audio outputs at the same time.
Volume adjustment also occurs in parallel.
14 System seings
The system seings are equally applicable to all sources.
> To access the system seings, press the MENU buon and select > System seings.
14.1 Equaliser
In order to adjust the sound of the DIGITRADIO 140, the equaliser is available with the preset tuning of Middle, Classic, Rock,
Pop and Jazz.
> Via MENU > System seings > Equaliser you can access the equaliser seings.
Alternatively:
> Press the EQUALISER (EQ.) buon on the remote control (19), to directly access the equaliser seings.
> Select the desired equaliser seing and press the OK buon.
An * highlights the current Selection/Seing.
BDA DigitRadio 140.indd 45 16/04/2018 16:16