Tektronix 222 - Page 157

Shock, operating and
nonoperating, 8-1 1
Single Sweep Operation, 5-8
SLOPE, 4-9
Sleep mode, 6-15
SOURCE, 4-1 1
Specifications
detailed, 8-1
summary of, 1-2
SSEQ,
4-9,4-10,5-8,6-12
STORE MODE, button, 3-17
STORE Mode,
4-3,6-5
Standard Accessories, 7- 1
Stride, 6-10
Temperature range, 8- 10
nonoperating (storage), 8-1 0
operating, 8-10
Test equipment required, A-1
Time Measurements
period, 5-4
rise time, 5-5
Top Panel Buttons, 3-16
TRlG COMM connector, 3-20
TRlG POS
button, 3-17
indicator, 4-20, 6-13
NONSTORE Mode, 6-12
STORE Mode, 6-12
setting, 4-18
TRIG'D indicator, 3-15
Trace length, 8-7
Trace shift, 8-3, 8-4
Trigger
external sensitivity, 8-6
input C, 8-6
input R, 8-6
internal sensitivity, 8-6
jitter, 8-6
LEVEL
control, 3-1 4
external range, 8-6
operation, 6-1 3
setting, 4-9
MODE
button, 3-1 5
setting, 4-10
SLOPE
button, 3-14
selection, 4-9
SOURCE, 6-12
button, 3-15
selection, 4-1 1
specifications, 8-6
TRlG POS, 3-17
TRIG'D indicator, 3-15
Trigger Controls, 3-1
4
Trigger Modes, 6- 10
Useful bandwidth, 1-2
Useful rise time, 8-2
useful bandwidth, 8-2
Variable
VOLTSIDIV, 3- 11, 4-6,
8-2
Vectors, 6- 10
Vert alignment, 3-19, 4-26
Vert trigger source, 6-12
Vertical Controls, 3-10
Vertical Deflection System, 8-1
Vertical input
R and C, 8-4
Vertical POSITION, 3-1 1, 4-5
control range, 8-3
Vertical resolution, 1-2, 8-1
Vibration, operating, 8- 11
VOLTSIDIV switch, 3-1 1 -3-12,
4-5
Voltage Measurements
peak-to-peak, 5-2
with respect to ground, 5-3
REV JUN 1989
INDEX-5