Tektronix DPO7000 Series Technical Reference

Performance Tests (MSO70000/C Series, DSA/DPO70000B/C Series, and DPO7000 Series)
Minimum requir
ements
Example Purpose
Instrumentba
ndwidth≤3GHz:
5 kHz to at least the instrument
bandwidth. Variable amplitude
from 60 mV to 2 V
p-p
into 50 Ω.
Frequency error <2.0%
Fluke 9500B
1
9. Generator, Si
ne-Wave
Instrument bandwidth >3 GHz:
50 MHz to at least the
instrument
bandwidth.
Variable amplitude from
60 mV to 2.0 V
p-p
into 50 Ω.
Frequency e
rror <2.0%
Anritsu MG3692B or
MG3694B Synthesized
CW Generato
r with options
2x (step attenuator), 3 (low
noise >2 GHz), 4 (10 MHz to
2 GHz low pha
se noise), 15
(high power), and 16 (high
stability)
Checking anal
og bandwidth,
trigger sensitivity,
sample-rate, external clock,
trigger sensi
tivity, time
qualified trigger, baud rate
limit, clock recovery, and
delay-time a
ccuracy
10. Meter, Level and Power
Sensor
Frequency range: 50 MHz
to the instrument bandwidth.
Amplitud
e range: 6 mV
p-p
to
2V
p-p
Rohde & Schwarz NRVS and
NRV-Z15 (
40 GHz)
Checking analog bandwidth
and Trigg
er Sensitivity
Instrumentbandwidth ≤3GHz:
Frequency range: DC to
18 GHz. T
racking: <2.0%
Agilent p
art number 11667A
11. Splitter, Power
Instrum
ent bandwidth >3 GHz:
Frequency range: DC to
40 GHz. Tracking: <2.0%
Anritsu
K241C (40 GHz)
Checking trigger sensitivity
and analog bandwidth
12. Cable 2.92 mm m ale-to-female Gore PhaseFlex cable
EL0CQ
0CP0360 (40 GHz)
Checking analog bandwidth
13. Adapter
Kmale
-to-male DC to 40 G Hz
Anritsu K220B
Check
ing analog bandwidth
14. Adap
ter (four required)
Male
N-to-female BNC
Tektronix part number
103-
0045-00
Chec
king analog bandwidth
15. Adapter
Fema
le N-to-male BNC
Tektronix part number
103-
0058-00 (4 GHz)
Chec
king analog bandwidth
16. Ada
pter (three required)
SMA
female-to-female
Tektronix part number
015
-1012-00 (18 GHz)
Che
cking trigger sensitivity
17. Ada
pter (three required)
SMA
male-to-female BNC
Tektronix part number
015
-1018-00
Che
cking the delay between
channels, delta time
18
.
Ad
apter
BNC to Minigrabber
Te
ktronix part number
013-0342-xx
Checking probe
compensation output
19. Adapter (four required) SMA male-to-BNC female TCA-BNC or TCA-292mm
a
nd, if required, SMA
male-to-BNC female adapter
(Tektronix part number
0
15-0554-00 (4 GHz) or
015-1018-00)
Signal interconnection,
m
easurement accuracy,
delay time, time qualified
trigger, trigger sensitivity,
D
C gain, offset, bandwidth,
input resistance, probe
compensation out, baud rate
limit, clock recovery
20. Pulse Generator
250 MHz, ≤ 150 ps rise time,
5 V out
Fluke 9500B
1
,
2
Used to test delta time
measurement accuracy
3–20 MSO70000/C, DSA70000B/C, DPO7000B/C, DPO7000, MSO5000, DPO5000 Series

Tektronix DPO7000 Series Specifications

General

Brand	Tektronix
Model	DPO7000 Series
Category	Test Equipment
Language	English