EasyManua.ls Logo

TeleWell TW-EAV510 AC - 3 G;4 G;LTE Info; AP Neighbor

TeleWell TW-EAV510 AC
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
3G/4G/LTE Info
This page shows 3G/4G/LTE network and dongle information.
Status: The current status of the 3G/4G LTE connection.
Signal Strength: The signal strength bar and dBm value indicates the current 3G/4G-LTE signal strength. The
front panel 3G/4G LTE Signal Strength LED indicates the signal strength as well.
Network Name: The name of the 3G/4G LTE network the router is connecting to.
Network Mode: The current operation mode for 3G/4G LTE module, it depends on service provider and
card’s limitation, GSM or UMTS.
Card Name: Given a name for the embedded 3G/4G LTE module.
Card Firmware: Current used FW in the 3G/4G LTE module.
Current Received (RX) /Transmitted (TX) Bytes: Current Rx/TX (receive/transmit) packets in Byte
Total Received (RX) /Transmitted (TX) Bytes: The total Rx/TX (receive/transmit) packets in Byte
Total Connection Time: The total of 3G/4G LTE dongle connection time since the 3G/4G LTE is up and
running
AP Neighbor
This page shows all WLAN AP’s information around your TW-EAV510 AC.

Table of Contents

Other manuals for TeleWell TW-EAV510 AC

Related product manuals