76
L2TP
L2TP, Layer 2 Tunneling Protocol is a tunneling protocol used to support virtual private networks (VPNs). It
does not provide any encryption or confidentiality by itself; it relies on an encryption protocol that it passes
within the tunnel to provide.
This page is for setting L2TP Server, Client and Account.
L2TP VPN: Enable/Disable L2TP function.
L2TP Server
Auth. Type: Setup the authentication type for client.
Encryption Mode: Setup MPPE encryption for L2TP tunnel, MPPE can only be enabled when Auth. Type set to
MS-CHAPV2.
Tunnel Authentication: Enable/Disable the tunnel authentication.
To Next Page
Loading...
