18
Factory Default Settings
Before configuring your router, you need to settings.
Web Interface (Username and Password)
Administrator
Username: hallinta
Password: Please check the device label
Attention
If you have forgotten the username and/or password of the router, you can restore the device to its
default setting by pressing the Reset Button more than 6 seconds.
Device LAN IPv4 settings
- IPv4 Address: 192.168.0.254
- Subnet Mask: 255.255.255.0
DHCP server for IPv4
- DHCP server is enabled
- Start IP Address: 192.168.0.100
- IP pool counts: 100
Configuration
Configuration via Web Interface
Open your web browser; enter the IP address of your router, which by default is 192.168.0.254, and
click ok or press ‘Enter’ key on the keyboard, a login prompt window will appear.
To Next Page
Loading...
