If the outlet is worn, it should be replaced with a high-quality outlet. Consider upgrading to a Tesla Wall Connector for greater
convenience and highest charging speed.
UMC_a009
Cannot charge - Charge handle temperature high
Check charge handle or charge port for debris
What this alert means:
Charging has been interrupted because the Mobile Connector has detected a high temperature in the charge handle that
connects to your vehicle's charge port.
What to do:
Make sure the Mobile Connector is fully inserted into your vehicle's charge port inlet.
Inspect the charge port inlet and the Mobile Connector handle for any obstructions or moisture. Make sure any obstruction in
the charge port or Mobile Connector handle has been removed and any moisture has been allowed to dry, then try re-inserting
the Mobile Connector handle into the charge port.
Also make sure the charge handle of the Mobile Connector is not covered by anything, and that there is no heat source nearby.
If the alert persists in normal ambient temperatures (under 38°C), and occurs during multiple charging attempts, this may
indicate a condition affecting the Mobile Connector or your vehicle. It is recommended that you schedule service at your
convenience.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 144 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
UMC_a010
Mobile Connector to adapter connection hot
Let cool - Plug adapter fully into Mobile Connector
What this alert means:
Charging has been interrupted because the Mobile Connector has detected a high temperature at the connection between the
wall plug adapter and the control box.
What to do:
Make sure the wall plug adapter is fully connected to the Mobile Connector control box.
Also make sure the wall plug adapter is not covered by anything, and that there is no heat source nearby.
After unplugging from the power source (wall outlet), inspect the wall plug adapter connection and the Mobile Connector
control box connection for any obstructions or moisture. Make sure any obstruction has been removed and any moisture has
been allowed to dry, then try re-inserting the wall plug adapter into the Mobile Connector and then connecting to the power
source (wall outlet).
Once the Mobile Connector control box temperature has decreased and any obstruction has been removed, the alert should
clear and charging should possible.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 144 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
Troubleshooting Alerts
261Troubleshooting
To Next Page
Loading...
