HYDRAULIC PULLER-TENSIONER PT1250
Manual: MI-PT1250-050-01-IT Date: 06.11.2017 Author: AT Page: 40 of 69
If it detects a malfunction of the controls on the radio control, it is possible to completely exclude the radio
control and control the machine from the main screen machine.
In the radio control management screen, you can enable or disable the radio control and / or on-screen
controls.
With this button, you can connect your radio controlled exclude commands activated
screen 7 ".
Activating one or more commands, the machine’s main screen will change, and will be displayed on the
relevant buttons for the management of these functions.
With this button, you can disconnect the radio control to control the machine through the
7 " screen.
Disconnecting the radio control from the machine, the main the machine screen will change and you will
see a dedicated button located on the bottom left.
Press the button
to connect
Press the button
to disconnect
To Next Page
Loading...
