7 First steps
13
First steps
Commissioning
Take the information in the testo information document (included with the
product) into account for this.
Power supply / Battery
The measuring instrument is supplied with a rechargeable battery.
Fully charge the battery before use.
If plugged in
, the measuring instrument is automatically powered via the
power supply.
Only charge the battery at an ambient temperature of 32 to 95°F.
Storage conditions for the energy storage unit:
• Ambient temperature from 50 to 68°F
• Charge level of 50 to 80%
Charge battery
Connect the instrument plug of the power supply to the power supply
socket on the measuring instrument.
Connect the power plug of the power supply to an outlet.
The charging process starts. LED in
the condensate trap flashes red.
The charging process stops
automatically when battery is fully
charged. LED in the condensate trap
has a continuous red light.
If the battery has discharged completely, the charging time at room
temperature is approx. 5-6 hrs.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
