TESTO 300 LL - Configure measurement display

9 Performing the measurement
46
9.6.1
Configure measurement display
1
Call up function: | Options | Config. measurem. Display

Edit Display menu is opened.
2
Measurement parameter
- Add: tap Add to open selection list of measurement parameters.
- Delete: tap on .
- Edit unit: tap on the measurement parameter you want to edit. Tap
on the required measurement unit in the selection list that has been
opened.
- Change position in the list: Press and hold and drag to the
required position.
- Accept changes: tap Confirm.
Selection list (example: Country version USA)
The overview of measurement parameters (available selection depends on the
chosen measurement type, fuel set and the sensors available in the measuring
instrument):
Display Measurement parameter
Tstack
Flue gas temperature
Tamb Combustion air temperature
Tinst. Instrument temperature
Pump Pump performance
O2 Oxygen
w ww. . com
information@itm.com1.800.561.8187